User's Manual

7ML19985FH04 SITRANS LR 400 – INSTRUCTION MANUAL Page 30
mmmmm
Operation
Operating Examples
Example 1(HART)
The length unit should be changed from m to mm. The starting point is the multi-display.
Follow the bold path in the diagram above for input. The other paths lead to other device
functions and parameters which are not required in this example. Use the arrow buttons
shown next to the numbered operating steps.
1
Function group
1 Auto-Setup
+12,300 m
+30 dB
Function group
2 Display
Function group
3 Diagnostics
Function group
4 Device data
4. Device data
1 Units
4.1 Units
1 Length Unit
4.1.1 Length unit
m
4.1.1 Length unit
mm
4. Device data
2. Operating param.
4. Device data
3 Analog output
4.3 Analog output
1 AO select
4.3.1 AO select
Level
4.3 Analog output
2 Level param.
4.3.2 Level param.
1 Level URV