User's Manual

Page 8 SITRANS LR 400 – INSTRUCTION MANUAL 7ML19985FH04
mmmmm
Specifications
Weight
• Weight of instrument and flange
Enclosure
• construction Die-cast aluminum, painted
• conduit 2 x M20
or 2 x ½” NPT
• ingress protection Type 4X/NEMA 4X, Type 6/NEMA 6, IP67
1
Environmental
2
location: indoor/outdoor
altitude: 2000 m max
ambient temperature: -40 to 65 °C (-40 to 149 °F)
relative humidity: suitable for outdoor (Type / NEMA 4X, 6/ IP67)
installation category II
pollution degree 4
• Process Temperature -40 to 200 °C (-40 to 392 °F)
Optional (Liquids version) -40 to 250 °C (-40 to 482 °F)
Process Connection Weight
Universal, 2" / 50 mm, flat faced, 0.5 bar maximum 5.3 kg (11.7 lbs)
Universal, 3" / 80 mm, flat faced, 0.5 bar maximum 6.1 kg (13.4 lbs)
Universal, 4" / 100 mm, flat faced, 0.5 bar maximum 6.8 kg (15.0 lbs)
Universal, 6" / 150 mm, flat faced, 0.5 bar maximum 8.5 kg (18.7 lbs)
DN80 PN16, flat faced 11.9 kg (26.1 lbs)
DN80 PN40, flat faced 12.9 kg (28.4 lbs)
DN100 PN16, flat faced 13.2 kg (28.9 lbs)
DN100 PN40, flat faced 15.5 kg (34.1 lbs)
DN150 PN16, flat faced 19.2 kg (42.1 lbs)
DN150 PN40, flat faced 24.1 kg (43.1 lbs)
3", 150 lb class, raised faced 12.2 kg (26.8 lbs)
3", 300 lb class, raised faced 14.3 kg (31.5 lbs)
4", 150 lb class, raised faced 14.8 kg (32.5 lbs)
4", 300 lb class, raised faced 20.2 kg (44.4 lbs)
6", 150 lb class, raised faced 20.1 kg (44.2 lbs)
6", 300 lb class, raised faced 31.8 kg (69.9 lbs)
JIS DN80 10K, flat faced 11.9 kg (26.1 lbs)
JIS DN100 10K, flat faced 13.2 kg (28.9 lbs)
JIS DN150 10K, flat faced 19.2 kg (42.1 lbs)
Easy Aimer with purge option 11.8 kg (26 lbs)
Note: Please ensure these are the most recent specifications. Contact your Siemens
Milltronics representative, or check our web site at www.siemens.com/milltronics for
the most up-to-date information.
WARNING: This product is designated as a Pressure Accessory per
Directive 97/23/EC and is not intended for use as a safety device.
1.
Use only approved, suitable sized hubs for watertight applications.
2.
See Process/Ambient de-rating curves in Appendix III.