User's Manual

Page 68 SITRANS LR260 (PROFIBUS PA) – OPERATING INSTRUCTIONS A5E32337685
mmmmm
Parameters
2.3.1.6.1. Batch ID
Identifies a certain batch to allow assignment of equipment-related
information (for example faults, alarms) to the batch.
Although higher batch ID numbers may be entered via PDM, the
maximum limit of 999999 should be used.
2.3.1.6.2. Batch Unit
Identifies the active Control Recipe Unit Procedure or the related Unit
(for example, reactor, centrifuge, drier).
2.3.1.6.3. Batch operation
Identifies the active Control Recipe Operation.
2.3.1.6.4. Batch Phase
Identifies the active Control Recipe Phase.
2.3.1.7. Process Value Scale (PROC. VALUE SCAL)
2.3.1.7.1. Lower Value
Defines the operational lower range value of the input value
(Process Value Scale) in PV (Level) Units. Process Value Scale
normalizes the input value to a customer-defined range.
2.3.1.7.2. Upper Value
Defines the operational upper range value of the input value
(Process Value Scale) in PV (Level) Units. Process Value Scale
normalizes the input value to a customer-defined range.
Values
Range: 0 to 999999 (on unit)
Default: 0
Values
Range: 0 to 65535
Default: 0
Values
Range: 0 to 65535
Default: 0
Values
Range: 0 to 65535
Default: 0
Values
Range: -999.99 to 999.99 m
Default: 0 m
Values
Range: -999.99 to 999.99 m
Default: 30 m (dependent on horn type)