User's Manual
Table Of Contents
- Table of Contents
- SITRANS LR250 Overview
- Specifications
- Installation
- Wiring
- Operating via the handheld programmer
- Operating via SIMATIC PDM
- Functions in SIMATIC PDM
- Quick Start Wizard via SIMATIC PDM
- Changing parameter settings using SIMATIC PDM
- Parameters accessed via pull-down menus
- Operating via AMS Device Manager
- Functions in AMS Device Manager
- Features of AMS Device Manager
- Device Description (DD)
- Configuring a new device
- Startup
- Pull-down menu access
- Device configuration
- Quick Start Wizard via AMS Device Manager
- Maintenance and Diagnostics
- Remaining Device Lifetime [see Remaining Device Lifetime (4.2.) on page 99]
- Remaining Sensor Lifetime [see Remaining Sensor Lifetime (4.3.) on page 102]
- Service Schedule [see Service Schedule (4.4.) on page 105]
- Calibration Schedule [see Calibration Schedule (4.5.) on page 108]
- Electronic Temperature
- Wear (see Wear on page 56)
- Communication
- Security
- Device Diagnostics
- AMS Menu Structure
- Functions in AMS Device Manager
- Parameter Reference
- 1. Quick Start
- 2. Setup
- 3. Diagnostics
- 4. Service
- 5. Communication
- 6. Security
- 7. Language
- Appendix A: Alphabetical Parameter List
- Appendix B: Troubleshooting
- Appendix C: Maintenance
- Appendix D: Technical Reference
- Principles of Operation
- Echo Processing
- Analog Output
- Maximum Process Temperature Chart
- Process Pressure/Temperature derating curves
- Loop power
- Appendix E: Application Examples
- Appendix F: HART Communications
- Appendix G: ATEX Certificates
- Appendix H: Firmware Revision History
- Glossary
- Index
- LCD menu structure
7ML19985JE03 SITRANS LR250 (HART) – INSTRUCTION MANUAL Page 61
mmmmm
AMS Device Manger
Device Description (DD)
SITRANS LR250 requires the DD for AMS Device Manager version 9.0.
You can locate the DD in Device Catalog, under Sensors/Level/Echo/Siemens Milltronics/
SITRANS LR250. Check the product page of our website at: www.siemens.com/LR250
, under
Downloads, to make sure you have the latest version of AMS Device Manager. If you need
to install a new DD see
Configuring a new device
below.
Configuring a new device
1) Check that you have the most recent DD, and if necessary download it from the
product page listed above. Save the files to your computer, and extract the zipped
file to an easily accessed location.
2) Launch AMS Device Manager– Add Device Type, browse to the unzipped DD file
and select it.
Startup
1) Launch AMS Device Manager. (Application Guides for setting up HART devices with
AMS Device Manager can be downloaded from the product page of our website at:
www.siemens.com/LR250.)
2) In Device Connection View right-click on the device icon and select Scan Device to
upload parameters from the device.
3) Double click the device icon to open the startup screen. The startup screen shows
device identification details, and a navigation window on the left-hand side of the
screen.