User's Manual
Table Of Contents
- Table of Contents
- SITRANS LR250 Overview
- Specifications
- Installation
- Wiring
- Operating via the handheld programmer
- Operating via SIMATIC PDM
- Functions in SIMATIC PDM
- Quick Start Wizard via SIMATIC PDM
- Changing parameter settings using SIMATIC PDM
- Parameters accessed via pull-down menus
- Operating via AMS Device Manager
- Functions in AMS Device Manager
- Features of AMS Device Manager
- Device Description (DD)
- Configuring a new device
- Startup
- Pull-down menu access
- Device configuration
- Quick Start Wizard via AMS Device Manager
- Maintenance and Diagnostics
- Remaining Device Lifetime [see Remaining Device Lifetime (4.2.) on page 99]
- Remaining Sensor Lifetime [see Remaining Sensor Lifetime (4.3.) on page 102]
- Service Schedule [see Service Schedule (4.4.) on page 105]
- Calibration Schedule [see Calibration Schedule (4.5.) on page 108]
- Electronic Temperature
- Wear (see Wear on page 56)
- Communication
- Security
- Device Diagnostics
- AMS Menu Structure
- Functions in AMS Device Manager
- Parameter Reference
- 1. Quick Start
- 2. Setup
- 3. Diagnostics
- 4. Service
- 5. Communication
- 6. Security
- 7. Language
- Appendix A: Alphabetical Parameter List
- Appendix B: Troubleshooting
- Appendix C: Maintenance
- Appendix D: Technical Reference
- Principles of Operation
- Echo Processing
- Analog Output
- Maximum Process Temperature Chart
- Process Pressure/Temperature derating curves
- Loop power
- Appendix E: Application Examples
- Appendix F: HART Communications
- Appendix G: ATEX Certificates
- Appendix H: Firmware Revision History
- Glossary
- Index
- LCD menu structure
Page 116 SITRANS LR250 (HART) – INSTRUCTION MANUAL 7ML19985JE03
mmmmm
A: Parameter List
LCD Fast Mode (4.9.) 112
Level Measurement (2.8.9.1.) 97
Loader Revision (2.1.3.) 79
Low Calibration Pt. (2.3.1.) 80
Lowest value (3.2.3.) 98
mA Output Value (2.6.6.) 86
Manufacture Date (4.6.) 111
Master Reset (4.1.) 99
Material (2.2.3.) 80
Material Level (2.5.1.) 83
Maximum Volume (2.7.1.2.) 88
Memory Test (4.11.) 112
Control Range: lower limit (Min. mA limit) (2.6.4.) 85
Near Range (2.8.1.) 90
PIN to Unlock (6.2.2.) 114
Position Detect (2.8.4.2.) 91
Powered Hours (4.7.) 111
Power-on Resets (4.8.) 111
Propagation Factor (2.8.3.) 91
Response Rate (2.4.1.) 81
Sensor Mode (2.2.2.) 79
Sensor Offset (2.3.3.) 81
Space Measurement (2.8.9.2.) 97
Timer (2.5.2.) 83
Measured Values (2.8.9.) 97
Units (2.2.1.) 79
Vessel Shape (2.7.1.1.) 86
Volume 1 (2.7.2.2.) 89
Volume Measurement (2.8.9.4.) 97
Write Protect (6.2.1.) 114
Parameter Name (Parameter Number) Page Number