User's Manual

7ML19985JE03 SITRANS LR250 (HART) – INSTRUCTION MANUAL Page 115
mmmmm
A: Parameter List
Appendix A: Alphabetical Parameter
List
Note: Maintenance Parameters are not listed below. See Remaining Device Lifetime
on page 99, Remaining Sensor Lifetime on page 102, Service Schedule on page
105
, and Calibration Schedule on page 108 for those parameters.
Parameter Name (Parameter Number) Page Number
Full Scale (20 mA Setpoint) (2.6.3.) 85
Start of Scale (4 mA Setpoint) (2.6.2.) 85
Access Control (6.1.1.) 113
Algorithm (2.8.4.1.) 91
Auto False Echo Suppression (2.8.7.1.) 94
Auto False Echo Suppression Range (2.8.7.2.) 96
CLEF Range (2.8.4.4.) 92
Confidence (2.8.6.1.) 93
Control Range: upper limit (Max. mA limit) (2.6.5.) 85
Control Range: lower limit (Min. mA limit) (2.6.4.) 85
Current Internal Temperature (3.2.1.) 98
Current Output Function (2.6.1.) 84
Damping Filter (2.2.4.) 80
Device Address (5.1.) 113
Dimension A (2.7.1.3.) 88
Dimension L (2.7.1.4.) 88
Distance Measurement (2.8.9.3.) 97
Echo Lock (2.8.5.1.) 92
Echo Profile (3.1.) 98
Echo Quality (2.8.6.) 93
Echo Strength (2.8.6.2.) 93
Echo Threshold (2.8.4.3.) 92
Empty rate (2.4.3.) 82
Far Range (2.8.2.) 90
Level (2.5.3.) 83
Fill Rate (2.4.2.) 82
Firmware Revision (2.1.2.) 79
Hard wa re Revi s i o n (2.1.1.) 79
High Calibration Pt. (2.3.2.) 81
Highest value (3.2.2.) 98
Hover Level (2.8.7.3.) 96
Language (7.) 114
LCD Contrast (4.10.) 112