User's Manual
Table Of Contents
- 8 Parameter reference
- 9 Service and maintenance
- 10 Diagnosing and troubleshooting
- 11 Technical data
- 12 Dimension drawings
- 12.1 Threaded horn antenna
- 12.2 Threaded horn antenna with extension
- 12.3 Flanged horn antenna
- 12.4 Flanged horn antenna with extension
- 12.5 Flanged encapsulated antenna (2"/DN50/50A sizes only)
- 12.6 Flanged encapsulated antenna (3"/DN80/80A sizes and larger)
- 12.7 Threaded PVDF antenna
- 12.8 Threaded connection markings
- 12.9 Raised-Face flange per EN 1092-1 for flanged horn antenna
- 12.10 Raised-Face flange per EN 1092-1 for flanged encapsulated antenna
- 12.11 Flat-Face flange
- 12.12 Process connection tag (pressure rated versions)
- A Appendix A: Technical reference
- B Appendix B: HART communications
- C Appendix C: Certificates and support
- 13 List of abbreviations
- 14 LCD menu structure
- Glossary
- Index
Parameter reference
SITRANS LR250 (HART)
114 Operating Instructions, 01/2014, A5E32220602-AB
Quick Start (1.)
Wizards provide step-by-step procedures to configure the device, filter out false echoes, and
upload and download parameters and firmware to the optional display for easy configuration of
multiple devices.
Quick Start Wizard (1.1.)
From measurement screen, press
RIGHT arrow
twice to open the Quick Start Wizard menu.
Select a wizard, press
RIGHT arrow
to open the first step, and follow the instructions.
Note
Do not use the Quick Start Wizard to modify individual parameters. (Perform customization
only after the Quick Start has been completed.)
● See Quick Start Wizard via the handheld programmer (Page 46).
● See Quick Start Wizard via SIMATIC PDM (Page 61).
● See Quick Start Wizard via AMS Device Manager (Page 92).
Setup (2.)
Note
Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly
st
ated.
Device (2.1.)
Hardware Revision (2.1.1.)
Corresponds to the electronics hardware of the SITRANS LR250.
Firmware Revision (2.1.2.)
Corresponds to the firmware that is embedded in the SITRANS LR250.
Loader Revision (2.1.3.)
Corresponds to the software used to update the SITRANS LR250.