User's Manual
Table Of Contents
- 8 Parameter reference
- 9 Service and maintenance
- 10 Diagnosing and troubleshooting
- 11 Technical data
- 12 Dimension drawings
- 12.1 Threaded horn antenna
- 12.2 Threaded horn antenna with extension
- 12.3 Flanged horn antenna
- 12.4 Flanged horn antenna with extension
- 12.5 Flanged encapsulated antenna (2"/DN50/50A sizes only)
- 12.6 Flanged encapsulated antenna (3"/DN80/80A sizes and larger)
- 12.7 Threaded PVDF antenna
- 12.8 Threaded connection markings
- 12.9 Raised-Face flange per EN 1092-1 for flanged horn antenna
- 12.10 Raised-Face flange per EN 1092-1 for flanged encapsulated antenna
- 12.11 Flat-Face flange
- 12.12 Process connection tag (pressure rated versions)
- A Appendix A: Technical reference
- B Appendix B: PROFIBUS PA profile structure
- C Appendix C: Communications via PROFIBUS
- D Appendix D: Certificates and Support
- 13 List of abbreviations
- 14 LCD menu structure
- Glossary
- Index
Parameter reference
SITRANS LR250 (PROFIBUS PA)
128 Operating Instructions, 01/2014, A5E32221386-AB
Condensed Status (3.4.)
When
Enable (3.4.1.)
is enabled, you can select the level of severity of errors, and tailor a device
response appropriate for your particular process.
● In
Event Index (3.5.1.)
you can select a particular event or error by means of its index
number.
● In
Event Status (3.5.2.)
you can assign a status to the selected event.
● In
Event Diagnosis (3.5.3.)
you can assign a diagnosis to the selected event.
Enable (3.4.1.)
Note
When cyclic communication is in progress, Condensed
Status Mode cannot be changed.
Options
NO (disabled)
*
YES (enabled)
Select
Yes
or
No
to enable/disable Condensed Mode.
Features supported (3.4.2.)
Read only. Features supported are:
● Condensed Diagnostics
● Extended Diagnostics
● Application Relationships
Features enabled (view only) (3.4.3.)
Read only. Lists those features that have been enabled.
Allocation (3.5.)