User's Manual

Table Of Contents
Commissioning
6.1 Operating via the handheld programmer
SITRANS LR250 (HART)
40 Operating Instructions, 01/2014, A5E32220602-AB
6.1.3
Programming
Note
While the device is in PROGRAM mode the output remains fixed and does not respond to
changes in the device.
The device automatically returns to Measurement mode after a period of inactivity in
PROGRAM mode (between 15 seconds and 10 minutes, depending on the menu level).
Change parameter settings and set operating conditions to suit your specific application. For
remote operation see Operating via SIMATIC PDM (Page 61) or Operating via AMS Device
Manager (Page 88).
Parameter menus
Note
For the complete list of parameters with instructions, see
Parameter Reference (Page 113).
Parameters are identified by name and organized into function groups. See LCD menu structure
(Page 247).
1. QUICK START
2. SETUP
2.1. DEVICE
............
2.7. LINEARIZATION
2.7.1. VOLUME
2.7.1.1. VESSEL SHAPE