User's Manual

Page EN-6 SITRANS LR 200 – QUICK START MANUAL 7ML19985QL81
mmmmm
English
PROGRAM Mode Display
Programming
• Set parameters to suit your specific application.
•Activate PROGRAM mode at any time, to change parameter values and set
operating conditions.
• For local programming, use the Siemens-Milltronics hand programmer.
• If you are programming from a distance, you can use either a HART handheld
communicator or a PC running Simatic PDM.
Hand programmer
For direct access to SITRANS LR 200, point the programmer at the SITRANS LR 200 display and
press the keys.
Security: (P000: Lock)
Factory setting for P069 is 1954: after a new value is entered and accepted, it becomes the
default setting.
Values Description
Value stored in P069 * Lock off: programming permitted
other Lock activated: no changes permitted
1
2
3
7
1– Primary Reading (displays parameter value)
2– Secondary Reading (displays parameter number)
3– Programming indicator
7– Auxiliary Reading (displays parameter names for P001 to
P010, if a language is selected. It displays the index value
for indexed parameters, such as P054).
Display
Hand-held programmer
max. 300 mm
(12")
Key Programming Mode
Decimal point
Negative value
CLEAR value
TOGGLE between Units and % on parameter
value
End PROGRAM session and enable RUN mode
Update echo quality parameters
Parameter scroll-up
Parameter scroll-down
DISPLAY opens parameter fields
ENTER the displayed value
LR-200QS-EN.fm Page 6 Wednesday, March 12, 2003 3:51 PM