User's Manual

Table Of Contents

PL-611 IQ Radar 300 Page 11

Specifications

Milltronics makes every attempt to ensure the accuracy of these specifications but

reserves the right to change them at any time. Contact your Milltronics representative

for the most recent specifications.

IQ Radar 300

Power:

• 100/115/200/230 ±15% V ac

, 50/60 Hz, 15 VA

Fuse:

• FU1, 2AG type, slow blow, .25 A, 250V

Interface:

• analog output: optically-isolated 0/4-20 mA into 750 Ω max, 0.02

mA resolution

• Dolphin/RS-485 link: refer to Dolphin Plus product specification

• programmer link: infrared receiver (refer to Programmer

specification on page 13)

• display (local): backlit, alphanumeric, and multi-graphic liquid

crystal for readout and entry

Performance:

• frequency: 5.8 GHz (U.S.A. 6.3 GHz)

• accuracy at 20° C: better than ±0.3% of range from 1 to 15m

• temperature drift: <±0.5% of range from –40 to 60° C (-40 to 392° F)

• measuring range: 0.4m to 15m

• repeatability: ± 10mm

• fail-safe: mA programmable high, low or hold upon LOE

condition

Mechanical:

Process Connections (Please refer to Appendix IV) for pressure/temperature limitations.)

• flat faced flanges: 316 stainless steel, 2”, 3”, 4”, 50mm, 80mm,

100mm. Bolt hole pattern to ANSI and DIN

types.

• threaded connection: 316 stainless steel, 1-1/2” or 2”, NPT, BSP

• sanitary connection: 316 stainless steel, 2”, 3”, or 4” tri-clamp

1 Factory set – see device nameplate.