User's Manual
Table Of Contents
- Table of Contents
- General Information
- Specifications
- Installation
- Location
- Dimensions: IQ Radar 300 with Rod Antenna
- Dimensions: Threaded Rod
- Dimensions: Horn
- Mounting
- Rod Assembly
- Mounting: Rod Assembly
- Mounting: Manhole Covers
- Mounting: Horn Antennas
- Mounting: Waveguide Antenna
- Mounting: Stillpipe or Sidepipe
- Mounting: Horn with Waveguide Extensions
- Mounting: Sanitary Mounting
- Mounting: Location
- Interconnection
- Start Up
- Operation(
- Application Examples
- Parameter Descriptions
- _
- _
- Quick Start Parameters (P001 to P007)
- Volume Parameters (P050 to P053)
- Display and Reading Parameters (P060 to P063)
- Fail-Safe Parameters (P070 to P072)
- mA Parameters (P200 to P219)
- Independent mA Setpoints Parameters (P210 and P211)
- Profile Record Parameters (P330 to P337)
- Auto Record ON and OFF Setpoint Parameters (P334 to P337)
- Installation Records Parameter
- Range Calibration Parameters
- Rate Parameters
- Measurement Verification Parameters
- Communication Parameters
- Echo Processing Parameters
- Algorithm Parameters
- TVT Adjustment Parameters
- P837 Auto Near TVT
- Test Parameters
- _
- Communications: Modbus Register Map
- Communications: Data Types
- Error Handling
- Troubleshooting
- Maintenance(
- Appendix I
- Appendix II
- Appendix III
- Appendix IV
- Appendix V
PL-611 IQ Radar 300 Page 51
Applications
Applications
Applications
Applications
Application Example: Juice Batch Tank with
Sanitary Horn Antenna
Note: The minimum distance from the antenna face to the target is limited by the near
blanking, P800.
Parameter Enter
P999
----
master reset
P001
1
mode of measurement = level
P002
1
material = liquid
P003
2
measurement response = 1m/min.
P004
240
antenna
= dielectric rod,
standard length
P005
1
units = metres
P006
5
empty distance = 5m
P007
4.5
span = 4.5m
P070
2
fail-safe timer = 2 minutes
P071
1
fail-safe = Hi
P652
tag value
offset correction = factory
P820
1
algorithm = factory
P830
4
TVT type = factory
P837
(Note below)
2 & 1
Auto Near TVT = 0 (factory set)
Note: Only set P837 if product is at least 2.5m (78”) away. If closer, leave P837 at 0
00
0
until such time the level drops below 2.5m (78”).
Run: To start normal operation, press the PROGRAM key .
P006
P007
existing 4” tri-clamp connection
mixer
mixer
4” sanitary horn
Note: Sanitary Antenna Options: The one-piece antenna/process seal provides excellent mounting method, even on non-
sanitar
y
installations.