User's Manual

PL-611 IQ Radar 300 Page 41
Start Up
Start Up Start Up
Start Up
1. Press the TOGGLE
TOGGLETOGGLE
TOGGLE key
to open Parameter Number
field.
2. The Parameter Number field
goes blank.
3. Enter parameter number.
Example:
. The
parameter value appears.
Note: Enter parameter numbers below 100 directly without leading zeros. Press the
ENTER key
to access the parameter. Example: To access P005, press
.
Modifying a Parameter Value
Once a parameter is accessed, you can set or modify its values.
Note:
• Security must be disabled. To disable security, set P000 to 1954.
• Values shown are for demonstration purposes only.
• Invalid entries will be rejected or limited.
Changing Parameter Values
1. Select parameter to modify.
2. Enter new value.
Example: press
and the
ENTER key
Clearing a Parameter Value
1. Scroll to, or select, the
parameter.
value entry field
value