User's Manual

Table Of Contents
PL-611 IQ Radar 300 Page 13
Specifications
Specifications
Specifications
Specifications
temperature: UHMW-PE -40 to 80°C (-40 to 176°F)
PTFE -40 to 200°C (-40 to 392°F)
5
pressure (vessel): dependant on process connection type and
temperature. Refer to Appendix IV on page 101
for charts.
Approvals (refer to device nameplate)
safety: CSA
NRTL/C
, CE, FM
radio: BAPT, Industry Canada, FCC
Hazardous areas:
IQ Radar 300: Cenelec/Sira
6
, EEx de IIB+H
2
T6 (Note: antenna
may be used in Zone 0 environments).
FM (USA) Class I, Div 1, Group A, B, C, D. Class
II/III, Div. 1, Group E, F, G(Class I, Zone 1 IIC T6)
CSA Class I/II, Div. 1, Group B, C, D, E,F, G.CE,
CSA
NRTL/C
FM (non-hazardous)
Canadian Registration Number (CRN) for pressure fittings:
7
Ontario, British Columbia, Alberta: OF6494.512
others pending
3A Sanitary
Note: Contact Milltronics for complete and up-to-date list of approvals.
Programmer (remote keypad)
enclosure: general purpose
67mm w x 100mm h x 25mm d
(2.6" w x 4" h x 1" d)
ambient temperature: -20 to 50° C (-5 to 122° F)
interface: proprietary infrared pulse signal
power: 9V battery (ANSI/NEDA 1604, PP3 or equivalent)
weight: 150g (0.3 lb)
5 See Temperature De-rating on page 97 and Approvals on page 13.
6 Approved for PTFE material only
7 All process connections except for the sliding waveguide