User's Manual

_
PL-550 7
SPECIFICATIONS _
SPECIFICATIONS
IQ RADAR 160
Power: 100/115/200/230 ±15% V ac*, 50/60 Hz, 15 VA
*factory set – see device nameplate
Interface:
analog output: optically-isolated 0/4-20 mA into 750 Ω max,
0.02 mA resolution
Dolphin/RS-485 link: refer to Dolphin product specification
programmer link: infrared receiver (refer to Programmer
specification below)
display (local): backlight, alphanumeric and multi-graphic liquid
crystal for readout and entry
Performance:
frequency: 5.8 GHz
accuracy: > ±0.3% of range (1 to 10 m)
range: 10 m
repeatability: 30 µW average
fail-safe: mA programmable high, low or hold
Mechanical:
enclosure (electronic):
construction: aluminum, epoxy coated
conduit: 2 x 1/2" NPT or PG 16 entry
ingress protection: Type 6 / NEMA 6 / IP-67
resonator: plated aluminum
flange: 316 stainless steel, 150 psi ANSI, DIN PN16,
3" sanitary tri-clamp
antenna:
type: dielectric rod
construction: Teflon
®
weight: 6.5 kg (14.3 lb) with 2"/150 psi ANSI flange,
weight will vary with flange size and rating