User's Manual

_
PL-550 31
OPERATION _
_
ANALOG OUTPUT
The IQ Radar 160 can be programmed to provide an analog output (P200) of 0 to
20 or 4 to 20 mA, and for proportional or inverse span.
Programming
Upon entering the Program mode, the analog output level holds its prior value.
Run
The analog output responds in the following manner:
*reference value only. mA level limited by near blanking.
0 and 100% are percentage of full scale reading (m, cm, mm, ft, in)
Level
(P001=1)
Space
(P001=2)
Distance
(P001=3)
0/4 – 20 mA
(P200 = 1 or 2)
20 – 0/4 mA
(P200 = 3 or 4)