User's Manual

PL-550 18
START UP
The first step in programming is to ensure that all parameters are at their factory
setting. The quickest way is to perform a master reset, P999.
For a Quick Start, P001 to P007 are the key parameters requiring entry.
They set: - mode of measurement
- process material
- antenna configuration
- measurement response
- units
- empty distance
- span
There are a number of other program parameters that can be changed
subsequently or during another programming session. Refer to Parameter
Description for a list of the parameters available.
When programming has been completed, the IQ Radar 160 can be put into run
by pressing or exiting Dolphin.