User's Manual

_
PL-550 17
START UP _
START UP
OVERVIEW
The IQ Radar 160 has two modes of operation: run and program . When the unit
is powered, after installation procedures have been completed, it is programmed
to start up in the run mode, to detect the distance from the antenna flange to the
target in meters.
typical display
The unit can be placed into the program mode at any time; to alter a number of
program parameters in order to better suit the application or user’s preferences.
Programming can be carried out locally via the hand programmer or remotely via
the optional Dolphin/RS-485 interface.
hand programmer
RS-485