User's Manual

8 20191209-6032702-UM
EN
3 Installation, initial start-up, safety
3.1 General information
Carefully read ALL items listed in section 3. Installation, initial start-up, safety before in-
stalling the devices in order to safeguard correct installation and operation.
The devices can only be used in combination with the WIRELESS LOCATION SYSTEM.
Buildup, installation as well as the use of the tools and clients of the localization system are
described in the corresponding guides and manuals.
3.2 Installation of WIRELESS TAG EPAPER 4 PULSE | PHASE
For an optimal location, the WIRELESS TAG EPAPER 4 PULSE | PHASE has to be mounted such
that it has a direct line of sight to the infrastructure devices.
Before usage of WIRELESS TAG EPAPER 4 PULSE | PHASE, check the device for damages such
that it will not be damaged during operation. Please protect the display from objects which
might scratch it or break it in another way.
The indicated operation temperature ranges must be satisfied.
The WIRELESS TAG EPAPER 4 PULSE | PHASE contains Lithium or Alkaline batteries. The im-
proper use of batteries can cause fire and skin burns.
The case of WIRELESS TAG EPAPER 4 PULSE | PHASE must never be crushed, punctured or
exposed to other mechanical violence. Only for battery exchange it is allowed to open the
case. Please pay attention to the correct polarity of the batteries (labeling on the battery lid).
Never expose the WIRELESS TAG EPAPER 4 PULSE | PHASE to fire or temperatures above
50 °C.
Do not expose the WIRELESS TAG EPAPER 4 PULSE | PHASE over a longer time to direct solar
radiation.
3.3 Operation of WIRELESS TAG EPAPER 4 PULSE | PHASE
The operation of WIRELESS TAG EPAPER 4 PULSE | PHASE is performed via the buttons on the front
panel. The functionality of the buttons can be programmed via software.