Operating Instructions

CAUTION
Fires and burns
Improper handling of the battery can lead to fire and skin injuries.
The housing of the device must not be squashed, punctured or exposed to other mechanical
influences.
Never expose the device to fire, temperatures above 40 °C or direct sunlight for an extended
period of time.
4.2 Operation
Note
Operate the device only with the accessories provided for this purpose, which are listed in the
section "Order data RTLS4083T (Page 9)".
The device is operated with the F1 function key on the front panel. The function of the key can
be programmed via the programming interface.
If the voltage is too low, the device switches off automatically. The device sends a "Low power"
message to the Locating Manager. The limit above which the device sends this message is
configurable. In this case, the device must be fully recharged within 3 months to avoid deep self-
discharge and damage to the battery.
See also
Programming interface (Page 13)
4.3 Cleaning and maintenance
The housing must not be opened.
The device may only be repaired by an authorized maintenance company or opened for other
types of work.
Improper opening or repairing of the device may result in risks for the user. Opening the device
without permission renders the warranty of the Siemens AG null and void.
Do not clean the enclosure with liquids or abrasive, caustic or flammable cleaning products.
Note
Due to the integrated battery, the device is a hazardous good. Observe the applicable
regulations when shipping.
Installation & Operation
4.3 Cleaning and maintenance
SIMATIC RTLS4083T
26 Operating Instructions, 03/2020, C79000-G8976-C527-03