Operating Instructions
Table Of Contents
Characteristics of the programming interface
3URJUDPPLQJLQWHUIDFH
53&FDOO
)RUH[DPSOH
VHWBGLVSOD\BWKHPH
$QVZHUUHFHLYHG
:DLWIRUDQVZHU
:DLWIRUHYHQWPHVVDJH
(YHQWPHVVDJH
UHFHLYHG
53&FDOOUHFHLYHG
&KHFN53&FDOO
6HQGUHVSRQVHWR
SURJUDPPLQJLQWHUIDFH
6HQGTXHU\WR
57/67
4XHU\UHFHLYHG
3URFHVVTXHU\
6HQGUHSO\
-REFRPSOHWHG
:DLWIRUFRQILUPDWLRQ
IURPWUDQVSRQGHU
6HQGHYHQWPHVVDJHWR
SURJUDPPLQJLQWHUIDFH
+HDUWEHDWZLWK
DGGLWLRQDOLQIRUPDWLRQ
IURPWKHWUDQVSRQGHU
&RQILUPHG
57/6/RFDWLQJ0DQDJHU
57/67
Blue Communication between programming interface and RTLS Locating Manager
Green Communication between RTLS Locating Manager and RTLS408xT
Red Communication between RTLS Locating Manager and RTLS408xT
All RPC calls (Remote Procedure Call) received by the programming interface are answered
immediately. This means that there is no need to wait for an acknowledgment of the RPC call
until the data transfer is completed. The completion of the data transmission is confirmed by an
event message provided for this purpose. The various event messages can be found in the
section "Event messages (Page 18)".
The positive acknowledgment of an RPC call does not guarantee or indicate successful
transmission and display of new display contents on the transponder. This can occur if the
transponder has been switched off during this time or is not within wireless range. Since the
Programming interface
3.2 Communication via the programming interface
SIMATIC RTLS4083T
Operating Instructions, 03/2020, C79000-G8976-C527-03 15