Operating Instructions

Command "Set Display Theme"
This command selects and activates the "theme" visible on the display and the transfer of the text
and barcode to be displayed. Texts are set to "empty" if they are not transferred in this call. If one
text is invalid, the others are still set.
URI "agilion.wls.epaper.set_display_theme"
Parameter TransponderID, type: UInt64
ThemeID, type: UInt32
Field with the following parameters:
FieldID, type: UInt32
Text, type: String
Return value Consists of:
Result, type: UInt32
Field with the following parameters:
RPCResult, type: UInt32
1 ... n FieldResults, type: UInt32
Command "Get Display Theme"
This command outputs the current "theme" and the current texts and codes for a single
transponder. Only completely transmitted texts are returned. If the current "ThemeID" is
unknown, it has the return value -1.
URI "agilion.wls.epaper.get_display_theme"
Parameter TransponderID, type: UInt64
Return value Consists of:
Result, type: UInt32
ThemeID, type: UInt32
Field with the following parameters:
FieldID, type: UInt32
Text, type: String
3.4 Event messages
General
The event messages and their parameters are described below.
Programming interface
3.4 Event messages
SIMATIC RTLS4083T
18 Operating Instructions, 09/2020, C79000-G8976-C527-04