Installation Guide

radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
This equipment should be installed and operated with a minimum distance of 20cm between the
radiator and your body. This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le
radiateur et votre corps. Cet appareil et son (ses) antenne (s) ne doivent pas être co-localisés
ou utilisés conjointement avec une autre antenne ou un autre émetteur.
III. What comes in the box?
Hardware:
Pebbles: Puck-sized vehicle occupancy sensors (72mm diameter x 13.4mm thick)
Gateways: Manage the transmission of data between Pebbles and the cloud database.
Communicates with Pebbles over a proprietary radio signal, and backhauls data to the
cloud using a cellular connection. Solar powered, with optional wired power for low light
/ underground conditions.
Software:
Installer: A web application that is provided to assign Pebbles to digital spaces. This
application should be used to record the Pebble IDs in each space as they are deployed.
Reporting: A web application that is provided to view real time Pebble data and run
analyses.
IV. Materials and tools required
Gateway installation tools
Hose clamp (included)
Banding straps (included)
Tools not included:
Ladder and/or lift for elevated mounting of gateways
Pliers (for tightening hose clamp)
Clippers (for trimming hose clamp)
If mounting to a building facade, may require additional tools
Sidewalk Labs Confidential and Proprietary Page 6 of 16