Instruction manual

4
44
Maintenance
Feed dog and hook maintenance
If the sewing machine makes a loud noise or rotates slowly, there could be thread waste
or dust in the hook or feed dog. Perform maintenance on the hook and the feed dog.
Cleaning the feed dog and hook
z
Before cleaning the hook, use the main power switch to turn off the
sewing machine, and then remove the power plug from the outlet.
Not doing so could cause an injury.
Do not use detergent, bleach, benzine, or thinner chemical cloths.
Doing so could cause discoloration or cracking.
Attention
2
8
1
Remove the presser foot and the needle.
Turn the pattern selection dial to “6”, and then turn the handwheel
towards yourself to raise the feed dog.
Use the screwdriver for
the needle plate to loosen
the screws in the needle
plate, and then remove the
needle plate.
Lift up the bobbin case so that part
c
is moved past part
d
, as shown.
Pattern selection dial
Feed dog
Handwheel
Caution
c
d