Specifications

5
www.quickcar.net
Aluminum Suspension Tubes
Manufactured in the USA from rigid, 6061 aluminum, QuickCar Suspension Tubes are up to 35% stronger than traditional hex or round units. Suspension tubes
include precision machined ends, corrosion resistant black anodized nish and identication on the left hand threaded end. Unique design allows easy adjust-
ments by hand or with a wrench. Choose from 1-1/8" O.D. with 5/8" threads, or 1-1/4" O.D. with 3/4" threads.
1-1/8" O.D. - 5/8" Threads
62-070 7"
62-075 7.5"
62-080 8"
62-085 8.5"
62-090 9"
62-095 9.5"
62-100 10"
62-105 10.5"
62-110 11"
62-115 11.5"
62-120 12"
62-125 12.5"
62-130 13"
62-135 13.5"
62-140 14"
62-145 14.5"
1-1/4" O.D. - 3/4" Threads
75-070 7"
75-075 7.5"
75-080 8"
75-085 8.5"
75-090 9"
75-095 9.5"
75-100 10"
75-105 10.5"
75-110 11"
75-115 11.5"
75-120 12"
75-125 12.5"
75-130 13"
75-135 13.5"
75-140 14"
75-145 14.5"
75-150 15"
75-155 15.5"
75-160 16"
NEW PRODUCTS
1-1/8" O.D. - 5/8" Threads
62-150 15"
62-155 15.5"
62-160 16"
62-165 16.5"
62-170 17"
62-175 17.5"
62-180 18"
62-185 18.5"
62-190 19"
62-195 19.5"
62-200 20"
62-205 20.5"
62-210 21"
62-215 21.5"
62-220 22"
62-225 22.5"
1-1/4" O.D. - 3/4" Threads
75-165 16.5"
75-170 17"
75-175 17.5"
75-180 18"
75-185 18.5"
75-190 19"
75-195 19.5"
75-200 20"
75-205 20.5"
75-210 21"
75-215 21.5"
75-220 22"
75-225 22.5"
75-230 23"
75-235 23.5"
75-240 24"
75-250 25"
75-260 26"
75-270 27"
Double Ended Suspension Tube Wrench
66-6275
Heavy duty steel,
double ended wrench
allows performing
quick adjustments to
QuickCar 1-1/8" or
1-1/4" O.D. suspension tubes.
Suspension Tube Ruler
66-100
Measure nearly
any suspension
component tted with rod ends, including suspension tubes, tie rods, etc., quickly
and precisely. Black powder coated ruler includes a locking thumb screw and pro-
vides precise measurements up to 36”. Sold complete with aluminum adapters
to measure components with 1/2”, 5/8” or 3/4” rod ends. Optional adapters allow
measuring parts with 1/4”, 5/16” or 3/8” rod ends.
66-105 Ruler Adapters, Allows Measuring Components With 1/4”, 5/16” Or 3/8” Rod Ends
66-106
Ruler Adapters, Allows Measuring Components With 1/2”, 5/8” Or 3/4” Rod Ends
(Included With 66-100)
1-1/8" O.D. - 5/8" Threads
62-230 23"
62-235 23.5"
62-240 24"
62-280 28"
62-457 45.7"
62-465 46.5"
62-477 47.7"
62-480 48"
62-487 48.7"
62-490 49"
62-500 50"
62-510 51"
62-600 72"
1-1/4" O.D. - 3/4" Threads
75-280 28"
75-290 29"
75-300 30"
75-310 31"
75-320 32"
75-330 33"
75-340 34"
75-350 35"
75-360 36"
75-370 37"
75-380 38"
75-390 39"
75-400 40"
75-410 41"
75-420 42"
75-430 43"
75-440 44"
75-600 72"
Torque Absorber
66-400
Now oered in an intermediate, 13” length version with three interior bis-
cuits. Track-proven to increase forward bite out of the turns with sustained
traction down the straightaway, QuickCar’s torque absorber is IMCA-legal
and lighter than spring style units. CNC-machined unit features an internal
brass bushing and grease ttings to eliminate any possibility of bind, while
the specially-threaded cap allows easy biscuit changes. Softer or harder
durometer biscuits may be purchased separately for tuning purposes.
Torque Absorber Biscuit Tuning Kit
66-508
Engineered for chassis tuning purposes,
QuickCar's Torque Absorber kit includes (2)
each of dierent durometer biscuits; blue
(extra soft), yellow (soft), red (medium) and
black (hard).
T
ube Rule
r
ih d d i l di i b i d i kl