Specifications

17
www.quickcar.net
IGNITION CONTROL PANELS
Dual Pickup Distributor Ignition Panel 50-1714
Engineered for cars using a single ignition box and a dual magnetic pickup
distributor, or crank trigger/distributor combination. Panel, which is 4-1/8"
wide x 3" high, features start, ignition, cross-over and two accessory switches.
Pre-wired with a Weather Pack connector for a direct, plug-in installation using
50-2034 wiring harness.
Dual Pickup Distributor Ignition
Wiring Harness 50-2034
Universal Weather Pack wiring harness is designed for cars using a single
ignition box and dual magnetic pickup distributor, or crank trigger/distributor
combination. Must be used with 50-1714 ignition panel.
NEW
NEW
Switch Panel To Wiring Harness Chart
The ignition switch panels listed below are designed as a direct, plug-in installation to a specic wiring harness, signicantly easing and speeding-
up the car building process. The chart identies the proper wiring harness for each ignition switch panel.
Ignition Switch Panel Wiring Harness
50-020 50-200 (Basic) or 50-201 (HEI)
50-022 50-200 (Basic) or 50-201 (HEI)
50-023 50-200 (Basic) or 50-201 (HEI)
50-025 50-200 (Basic) or 50-201 (HEI)
50-031 50-2031 (Single Ignition) or 50-2032 (HEI)
50-033 50-2031 (Single Ignition) or 50-2032 (HEI)
50-052 50-200 (Basic) or 50-201 (HEI)
50-053 50-200 (Basic) or 50-201 (HEI)
50-102 50-200 (Basic) or 50-201 (HEI)
50-103 50-200 (Basic) or 50-201 (HEI)
Ignition Switch Panel Wiring Harness
50-1711 50-2021 (Dual Ignition)
50-1713 50-2021 (Dual Ignition)
50-1714 50-2034 (Dual Pickup)
50-711 50-2021 (Dual Ignition)
50-720 50-200 (Basic) or 50-201 (HEI)
50-731 50-2031 (Single Ignition) or 50-2032 (HEI)
50-7711 50-2021 (Dual Ignition)
50-7713 50-2021 (Dual Ignition)
50-7731 50-2031 (Single Ignition) or 50-2032 (HEI)
Basic wiring harness 50-200 with ignition control panel 50-020Basic wiring harness 5
0
-
200
with ignition control panel 5
0
-
020