Datasheet

M8 AND M12 CONNECTORS FOR INDUSTRIAL APPLICATIONS | SICK8018656/2018-02-28
Subject to change without notice
GLOSSARY Annex
Mou ... Not
43
PVC PUR PP
Lactic acid, 10%
– + +++
Magnesium chloride, 30%
+++ ++
*)
Methanol
– + +++
Methyl acetate
– – *)
Methyl ethyl ketone
– +
+++
Methyl glycol
– –
*)
Methyl glycol acetate
– – *)
Methylene chloride
– – –
Nitric acid, 10%
– –
+
Ozone
+++ +++ +
Perchlorethylene
+++ – *)
Petroleum ether
– +++
*)
Phosphoric acid, 10%
+++ –
+++
Potassium dichromate
+++ +++
++
Potassium hydroxide solu-
tion, 10%
+++ +++ ++
Potassium nitrate
+++ +++ ++
Potassium permanganate
+ – +
Sodium chloride, 10%
+++ ++ +++
Sodium hydroxide solution,
10%
+++ +++ +++
Sodium hypochlorite
solution
+ +++ *)
Sulfuric acid, 30%
+++ +++ +++
Tetrachloroethylene
– – –
Tetrahydrofuran
– – –
Toluene
– – –
Trichloroethylene
– – –
Xylon
– – –
Resistant: +++, largely resistant: ++, slightly resistant: +, not resistant : –
*)
There are no test results or evidence concerning the behavior of polypropyl-
ene with this material.
Table: Material compatibility
The user should always run tests to check the suitability for
specic applications. The chemical resistance given applies
only to unpressurized storage and, unless otherwise stated, at
room temperature.
Mounting instructions
For xed installation of cable, minimum radius: 5 x cable
diameter
For xed installation of cable, minimum radius: 10 x cable
diameter
Cable bend radius
Bundling several cables
Fixed installation of cables
N
Notch sensitivity
Notch sensitivity describes the tendency of a plastic to crack
at points with notches, sharp edges and abrupt changes in
wall thickness, i.e., at places of stress concentration.