Datasheet

ManualsBrandsSick ManualsOptical SensorsRetro-Reflective Optical Sensor 7m PNP

Cylindrical photoelectric sensors offer

the beneﬁ ts of very fast commissio-

ning and compact design. Moreover,

the V180-2 series is the answer to

all commercial challenges requiring

the use of cylindrical photoelectric

sensors.

Quick selection of the appropriate

version: the product range is adapted

to essential market requirements.

Different versions are available: pho-

toelectric proximity sensors in three

different scanning distance ranges,

as well as photoelectric reﬂ ex sen-

sors and through-beam photoelectric

sensors. M18 housing, material opti-

onally made of plastic or metal. The

matching product range allows fast

and accurate selection of the correct

version for the problem.

Top performance in a universal ap-

plication environment: the scanning

ranges and associated operating

reserves provide reliable solutions for

many applications. A fast response

time also enables accurate detection

in dynamic processes and for objects

at high speeds.

Red light and visible light spot: the

innovative red light sender diode

assists with fast adjustment and com-

missioning, even in bright ambient

conditions. The light spot is homoge-

neous and extremely bright, making

alignment of the sensors to different

objects very easy and comfortable in

any situation.

360° display: operational perfor-

mance can be visualized using the

two LEDs on the sensor, enabling

fast and direct feedback even when

mounted in a restricted space.

V180-2

M18 Cylindrical Photoelectric Sensor Series

A rounded concept, not only economically

DATA SHEET

Benefits at a glance

Convenient and fast operation

start-up thanks to:

• Red light LED

• 360°LED indication

• Sensitivity adjustment

Reliable detection thanks to:

• Large ranges

• Fast response time

Summary of content (16 pages)

PAGE 1
D ATA S H E E T V180-2 M18 Cylindrical Photoelectric Sensor Series A rounded concept, not only economically Cylindrical photoelectric sensors offer the benefits of very fast commissioning and compact design. Moreover, the V180-2 series is the answer to all commercial challenges requiring the use of cylindrical photoelectric sensors. Quick selection of the appropriate version: the product range is adapted to essential market requirements.
PAGE 2
VTF180-2 Photoelectric proximity sensor, background blanking BGB, red light, scanning distance 140 mm Dimensional drawing Metal housing Plastic housing 62.5 (2.46) 62.5 (2.46) 2 2 60.5 (2.38) (0.08) 56.8 (2.24) 56.8 (2.24) 41.8 (1.65) 7 4 3 (0.28) 34 (1.34) Ø 16.6 (0.65) (0.94) 6 5 2 24 M18x1 Ø 16.6 (0.65) (0.87) 2 (0.08) 6.2 (0.24) 34 (1.34) 6.2 (1.03) 22 5 2 43 60.5 (2.38) (0.37) 56.8 (2.24) 41.8 (1.65) 2 (0.08) 24 6 5 7 1 4 3 (0.28) M18x1 Ø 16.6 (0.65) (0.94) 34 (1.
PAGE 3
V180-2 Technical data Scanning distance SD, typ. max. 1) Operating distance SD 1) Light spot diameter Angle of dispersion sender Light source 2), light type Sensitivity adjustable Orange LED indicator Green LED indicator Supply voltage VS Residual ripple 4) Current consumption 5) Switching outputs Signal voltage PNP HIGH/LOW Signal voltage NPN HIGH/LOW Switching mode Output current IA max. Response time 7) Max.
PAGE 4
VTE180-2 Photoelectric proximity sensor, background blanking BGB, red light, scanning distance 450 mm Dimensional drawing Metal housing Plastic housing 62.5 (2.46) 62.5 (2.46) 2 2 60.5 (2.38) (0.08) 56.8 (2.24) 56.8 (2.24) 41.8 (1.65) 7 4 3 (0.28) 34 (1.34) Ø 16.6 (0.65) (0.94) 6 5 2 24 M18x1 Ø 16.6 (0.65) (0.87) 2 (0.08) 6.2 (0.24) 34 (1.34) 6.2 (1.03) 22 5 2 43 60.5 (2.38) (0.37) 56.8 (2.24) 41.8 (1.65) 2 (0.08) 24 6 5 7 1 4 3 (0.28) M18x1 Ø 16.6 (0.65) (0.94) 34 (1.
PAGE 5
V180-2 Technical data VTE180-2 Scanning distance SD, typ. max. 1) Operating distance SD 1) Light spot diameter Angle of dispersion sender Light source 2), light type Sensitivity adjustable Orange LED indicator Green LED indicator Supply voltage VS Residual ripple 4) Current consumption 5) Switching outputs Signal voltage PNP HIGH/LOW Signal voltage NPN HIGH/LOW Switching mode Output current IA max. Response time 7) Max.
PAGE 6
VTE180-2 Photoelectric proximity sensor, energetic, red light, scanning distance 1,100 mm Dimensional drawing Metal housing Plastic housing 62.5 (2.46) 62.5 (2.46) 2 2 60.5 (2.38) (0.08) 56.8 (2.24) 56.8 (2.24) 41.8 (1.65) 7 4 3 (0.28) 34 (1.34) Ø 16.6 (0.65) (0.94) 6 5 2 24 M18x1 Ø 16.6 (0.65) (0.87) 2 (0.08) 6.2 (0.24) 34 (1.34) 6.2 (1.03) 22 5 2 43 60.5 (2.38) (0.37) 56.8 (2.24) 41.8 (1.65) 2 (0.08) 24 6 5 7 1 4 3 (0.28) M18x1 Ø 16.6 (0.65) (0.94) 34 (1.34) Ø 16.6 (0.
PAGE 7
V180-2 Technical data VTE180-2 Scanning distance SD, typ. max. 1) Operating distance SD 1) Light spot diameter Angle of dispersion sender Light source 2), light type Sensitivity adjustable Orange LED indicator Green LED indicator Supply voltage VS Residual ripple 4) Current consumption 5) Switching outputs Signal voltage PNP HIGH/LOW Signal voltage NPN HIGH/LOW Switching mode Output current IA max. Response time 7) Max.
PAGE 8
VL180-2 Photoelectric reflex sensor, with polarizing filter, red light Dimensional drawing Metal housing Plastic housing 62.9 (2.48) 60.5 (2.38) 60.5 (2.38) (0.08) 56.8 (2.24) 5 2 7 4 3 (0.28) (0.94) 34 (1.34) 70.2 (2.77) 5 2 43 9.3 60.5 (2.38) 60.5 (2.38) (0.37) 56.8 (2.24) 5 7 1 4 3 (0.28) 24 (0.94) 34 (1.34) Ø 16.6 (0.65) Ø 16.6 (0.65) 6 56.8 (2.24) 2 (0.08) 0.4 (0.02) 6.2 (1.03) 34 (1.34) 6.2 (1.03) (0.87) 4 (0.18) 2 (0.08) 0.4 (0.02) 70.2 (2.77) 9.3 (0.
PAGE 9
V180-2 Technical data VL180-2 Scanning range SR, typ. max./reflect. Operating range Light spot diameter Angle of dispersion sender Light source 2), light type Polarizing filter Sensitivity adjustable Orange LED indicator Green LED indicator Supply voltage VS Residual ripple 4) Current consumption 5) Switching outputs Signal voltage PNP HIGH/LOW Signal voltage NPN HIGH/LOW Switching mode Output current IA max. Response time 7) Max.
PAGE 10
VSE180-2 Through-beam photoelectric sensor, red light Dimensional drawing Metal housing Plastic housing 62.5 (2.46) 62.5 (2.46) 2 2 60.5 (2.38) (0.08) 56.8 (2.24) 56.8 (2.24) 22 34 (1.34) (0.87) 41.8 (1.65) 24 Ø 16.6 (0.65) 7 4 3 (0.28) 34 (1.34) (0.94) 6 5 2 2 (0.08) M18x1 Ø 16.6 (0.65) Very large scanning ranges Adjustable sensitivity LED indicator VE180-2: switching output active and operation reserve Red light as alignment aid Material optionally made of plastic or metal 41.8 (1.
PAGE 11
V180-2 Technical data VSE180-2 Scanning range SR, typ. max. Operating range Light spot diameter Angle of dispersion sender Light source 1), light type Sensitivity adjustable Orange LED indicator Green LED indicator Supply voltage VS Residual ripple 3) Current consumption sender 4) Current consumption receiver 4) Switching outputs Signal voltage PNP HIGH/LOW Signal voltage NPN HIGH/LOW Switching mode Receiver Output current IA max. Response time 6) Max.
PAGE 12
Cables and connectors Dimensional drawings and Ordering information SENSICK screw-in system M12, 4-pin, Enclosure rating IP 67 Female connector M12, 4-pin, straight 1) Cable diameter 5 mm, 4 x 0.25 mm2, sheath PVC Model name Part No. Contacts DOL-1204-G02M 6009382 4 DOL-1204-G05M 6009866 4 DOL-1204-G10M 6010543 4 DOL-1204-G15M 6010753 4 Cable length *L* 2m 5m 10 m 15 m Female connector M12, 4-pin, angled1) Cable diameter 5 mm, 4 x 0.25 mm2, sheath PVC Model name Part No.
PAGE 13
V180-2 Dimensional drawings and Ordering information Mounting systems Mounting bracket Model name Part No. BEF-WN-M18 5308446 Universal bracket (rod mounting) for sensors Distance Z: bar center – inner plate surface Part No. Bar-Ø (mm) Model name 2022465 12 BEF-KHS-H01 14 42.8 15 Z 18 20 36.5 20 18.2 1.5 Distance Z (mm) 15.0 16.4 17.1 19.2 20.7 25 .7 45 Locking screw 37 14 16 15°15° 41 4.3 ø28 6 30 ø12-20 42 Mounting plate, steel, galvanized Model name Part No.
PAGE 14
Reflectors Dimensional drawings and Ordering information Reflectors for V180-2, plastic design for temperatures up to 65 °C Reflector 47 x 47 mm, screwable Model name Part No. P250 5304812* * included 84 with delivery VL180-2 47 47 for M4 5 84 68 71 51 2.5 61 Reflector 80 x 80 mm, screwable Part No. 1003865 Model name PL80A 10 20 10 3.5 8 51 4.5 8.5 8 Reflector, diameter 83 mm, center hole mounting Model name Part No.
PAGE 15
V180-2 Dimensional drawings and Ordering information Reflectors for V180-2, plastic design for temperatures up to 65 °C Reflector 15 x 38 mm, screwable Model name Part No. PL20A 1012719 Part No. 5319981 4051185 Roll: 50 mm x 22.8 m Cut to size: 50 mm x L (mm) 50 ø4.6 60 ø8 4.2 15 50 38 Reflective tape Model name REF-Plus-R50 REF-Plus-R50-K L 18 7.
PAGE 16
8013536/2010-06-24 ∙ GO/FD (2010-07) ∙ USmod 4c int35 Australia Phone +61 3 9497 4100 1800 33 48 02 – tollfree E-Mail sales@sick.com.au Belgium/Luxembourg Phone +32 (0)2 466 55 66 E-Mail info@sick.be Brasil Phone +55 11 3215-4900 E-Mail sac@sick.com.br Ceská Republika Phone +420 2 57 91 18 50 E-Mail sick@sick.cz China Phone +852-2763 6966 E-Mail ghk@sick.com.hk Danmark Phone +45 45 82 64 00 E-Mail sick@sick.dk Deutschland Phone +49 211 5301-301 E-Mail kundenservice@sick.