User's Manual

Chapter 7 Operating Instructions
Radio Frequency RFH620 Interrogator
54 © SICK AG · Division Auto Ident · Germany · All rights reserved 8013105/0000/2009-05-12
Commissioning and configuration
7.4.4 Save, display and print the current parameter set
When archiving a parameter set, it is recommended to not only save the project file on the
PC but also to print out the contents of the file.
1. In order to save the current parameter set, select the menu item
SAVE AS in the menu
bar under
PROJECT.
2. Enter a file name in the dialog window and confirm it by clicking on
SAVE.
The SOPAS-ET configuration software saves the current settings in a configuration file
"*.spr".
3. In order to print out the current parameter set, select the command
PRINT/PRINT PREVIEW
in the menu bar under
PROJECT.
The SOPAS-ET configuration software displays a preview of a table with a list of all the
parameter values.
4. Click on in the tool bar at the top of the dialog window.
The dialog window
PRINT for the printer configuration appears.
5. Edit setting accordingly and confirm with OK.
The current project settings are printed as a table on several pages.
TIP To save the current parameter set as a PDF, in the menu bar under
PROJECT select the com-
mand
PRINT/SAVE AS PDF FILE.