Datasheet

Special reflectors
24 REFLECTORS | SICK 2011-03-07
Subject to change without notice
PxxxCHEM – Resistant to ECOLAB cleaning agent
Implementation:
– Immersion of the CHEM reflectors in various cleaning solutions
and concentrates
– Temperature: +60 or +80 °C
– Duration: 2 weeks
– After 2 weeks, the reflectors are rinsed with DI water and optically
and gravimetrically assessed.
Product/concentration T [°C] Suitability
P3-cosa CIP 72 60 +
P3-cosa CIP 77 80 +
P3-cosa CIP 90 80 +
P3-cosa CIP 92 80 +
P3-cosa CIP 95 80 +
P3-cosa PUR 80 80 +
P3-cosa PUR 83 80 +
P3-cosa PUR 84 80 +
P3-cosa PUR 85 80 +
P3-cosa PUR 88 80 +
P3-cosa FOAM 40 80 +
P3-cosa DES 80 +
P3-cosa FLUX 22 80 +
P3-cosa FLUX 33 80 +
P3-cosa FLUX 44 80 +
P3-cosa FLUX 55* 80 0
+ = suitable
0 = suitable in certain conditions
– = unsuitable
* = contains nitric acid
PxxxCHEM – Assessment of chemical stress by TÜV Rheinland (Rhineland technical testing authority)
Liquid tested
Substance group/
component parts
Assessment after (composition, color)
1 day 7 days 14 days
Acetaldehyde Aldehydes 0 0 0
Acetone Ketones
1 (softening of
surface)
1 (softening of
surface)
1 (softening of
surface)
Formic acid
Organic acids 000
Benzene
Aromat. hydrocarbon 0 0 1 (opacity)
1,3-Butanediol Polyalcohols 0 0 0
Butylamine Amines 0 0 0
Chlorobenzene Chlor., aromat. hydrocarbon 000
Chloroform CHC 0 0 0
Chlorosulfonic
acid
Acid chlorides 0 0 0
Diesel fuel Fuels 0 0 0
Diethyl ether Ether 0 0 0
Dimethyl-
formamide
Amides 0 0 0
Dimethyl sulfate Ester000
Glacial acetic
acid
Organic acids 0 0
1
(slight fissures)
Acetic acid
10 %
Organic acids 0 0 0
Ethanol Alcohols 0 0
1 (slight color
change)
Ethylene glycol Polyalcohols 0 0 0
Formaldehyde 37 % Aldehydes 0 0 0
Heating oil EL Fuels 0 0 0
Isopropanol Alcohols 0 0 0
Kerosene Fuels 0 0 0
m-Cresol Phenols 0 0 0
Methanol Alcohols 0 0 1 (opacity)
n-Heptane hydrocarbon 0 0 0
Sodium hydroxide 10 % Alkalis 0 0 0
Salt acid 20 % Inorganic acids 0 0 0
Sulfuric acid
98 %
Inorganic acids 0 0 0
1, 1, 2, 2
Tetrachloroethane
Chlorinated
hydrocarbon
000
Tetrachloromethane
Chlorinated
hydrocarbon
000
Toluol
Aromat. hydrocarbon 000
Hydrogen
peroxide (H
2
O
2
),
10%
000
Cleaning agent
Medicine
a
000
Cleaning agent
Food
a
000
0 = no change
1 = slight change (description required)
2 = significant change (description required)
a = Lysoformin
®
3000 (contents: glyoxal, glutaral, didecyldimethylammonium chloride)
b = Bio Tec detergent (contents: alkylbenzene sulfonate, alkyl ether sulfate)
Measured values were taken from the inspection report by TÜV Rheinland
(Rhineland technical testing authority) (Test no. 620/ 434628)
Note:
Information on this page is valid for the CHEM reflectors on page 23.