Operating instructions

Maintenance
OXOR-E · Supplementary Operating Instructions · 8013035 V 2.0 · © SICK AG 25
Subject to change without notice
Fig. 4 Oxygen sensor
5.4 Renewing the oxygen sensor
5.4.1 Built-in versions
● On standard built-in versions, the Analyzer module OXOR-E is fitted on a mounting
bracket inside the device. The GMS800 enclosure has to be opened to renew the sen-
sor. Only authorized skilled persons may carry out this work.
▸ Have the sensor on standard versions renewed by the manufacturer's Customer Ser-
vice.
● In the S810 19" enclosure, the Analyzer module OXOR-E can be fitted behind the front
panel. It is accessible when the front panel is swiveled down (→ Fig. 5).
▸ For versions fitted behind the front panel, either follow the described procedure
carefully (→ §5.4.2) or have the sensor renewed by the manufacturer's Customer Ser-
vice or by authorized skilled persons.
Fig. 5 Analyzer module OXOR-E behind the S810 enclosure front panel