Operating instructions

12 OXOR-E · Supplementary Operating Instructions · 8013035 V2.0 · © SICK AG
Functions in SOPAS ET
Subject to change without notice
3.1 Menu functions in SOPAS ET – in own menu branch
Only valid when the Analyzer module is connected as an independent module.
User level: O Operator (standard) A Authorized operator
Access rights: ○ Viewing ● Setting up/starting
Directory Menu contents O A Explanation
OXOR ○○
Measuring value display ○○
Measuring component 1
Component ○○ →p. 16 [1]
Measured value ○○ →p. 16 [2]
Unit ○○ →p. 16 [3]
Measuring component 2
[1]
○○
Measuring component 3
[1]
○○
Measuring component 4
[1]
○○
Diagnosis ○○
Module state
Failure ○○
Maintenance request ○○ →p. 16 [4]
Function(s) active ○○
Uncertain state ○○
Logbook Pos.|Date|Source| … – ○→p. 18, §3.4.1
Operating hours h–○→p. 16 [5]
Measuring component 1 ○○
Name / unit
Component ○● →p. 16 [1]
Unit ○○ →p. 16 [2]
State
Failure ○○
Maintenance request ○○ →p. 16 [4]
Function(s) active ○○
Uncertain state ○○
Validation measurement (QAL3) Zero point ○○
Reference point ○○
Measuring component 2
[1]
○○
Measuring component 3
[1]
○○
Measuring component 4
[1]
○○
Parameter ○○
Sampling point
Description – ●→p. 16 [6]
RS485 interface Module address – ○→p. 16 [7]
Baud rate – ●
Data bits – ●→p. 16 [8]
Stop bits – ●
Parity – ●
Measuring component 1 ○○
Physical meas. range
Component ○● →p. 16 [1]
Unit ○○ →p. 16 [3]
Start value ○○ →p. 16 [9]
End value ○○ →p. 16 [10]
Base value ○○ →p. 16 [11]
Measuring channel ○○ →p. 16 [12]
Precision ○○ →p. 16 [13]
Damping – ●
Damping (el. T90%)
Time constant [s] – ●
Dynamic damping Status [On/Off] – ● → p. 19, §3.4.3
Time constant [s] – ●
Threshold – ●
Measuring component 2
[1]
○○
Measuring component 3
[1]
○○
Measuring component 4
[1]
○○