Datasheet

ENCODERS AND INCLINATION SENSORS | SICK8012072/2017-08-24
Subject to change without notice
15
INCREMENTAL ENCODERS DFS60
Through hollow shaft, programmable
Type
B Pulses per revolution programmable 1 … 10000
A Pulses per revolution programmable 1 … 65536
Mechanical design
A Through hollow shaft, 6 mm
B Through hollow shaft, 8 mm
C Through hollow shaft, 3/8”
D Through hollow shaft, 10 mm
E Through hollow shaft, 12 mm
F Through hollow shaft, 1/2”
G Through hollow shaft,14 mm
H Through hollow shaft, 15 mm
J Through hollow shaft,5/8” (tting for collets, see accessories)
Electrical interface (factory setting: output level TTL)
P 4.5 … 32 V, TTL/HTL programmable
M
4.5 … 32 V, TTL/HTL programmable with O-set function on pin 7 of the M23 connector. (Only in connection with
connection type A)
Connection type
A M23 connector, 12-pin, radial
C M12 connector, 8-pin, radial
K 8-core cable, universal 1.5 m
1)
L 8-core cable, universal 3 m
1)
M 8-core cable, universal 5 m
1)
N 8-core cable, universal 10 m
1)
Resolution
(factory set pulses per revolution with type B:10000, with type A: 65536)
Always 5 digits in text, see “Pulses per revolution”
D F S 6 0 - T
1)
The universal cable outlet is positioned in such a way that kink-free laying in radial or axial direction is possible.
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T