Assembly Instructions

(WeChat⑤ as an example) displays the name and content and vibrates once (message reading is based
on the trigger button. If the message is not read and the screen is off, it is unread. If there are unread
messages, trigger button, reads the message, and then back to the main interface.)
2. Alarm setting
After connecting APP with the bracelet, enter the "Alarm Settings" on the APP, click "+", set the corresponding
alarm time, date, label, and then click "√" to set the alarm successfully. It is supported with 20 groups; When
the clock is reminded, the alarm label ⑥will be displayed on the bracelet, and it will vibrate for 10 times.
Press the touch button to turn off.
3. Sedentary reminder
After connecting APP with the bracelet, enter the "Sedentary setting" on the APP, set the sedentary
"start time" , "stop time" and "how long for reminding?". When the bracelet detects that it reaches preset
sedentary time, the screen will display the sedentary icon ⑦and vibrate twice.
4.Wrist-up light the screen :
After connecting, open the "Turn the wrist" on the APP, the "Start time", "Stop time" and "Sensitivity" of the
"Turn the wrist" can be set.
This function is: In the standby state, turn the wrist to light the screen and enter the main interface.
5. Pair device
If there is an account login, open "Pair Device", and the data of two days ago and current data will be
uploaded on app. If there is no account login, it will not upload data even though the function is open.