Assembly Instructions

1. Po w e r o n : l o n g p re s s for 5 S to e n te r i n to m a i n interface ① in the state of
power off. Long press to enter interface to view Bluetooth address and software version. Select the different
main interfaces in the "Settings of main interface style" of the APP. Press touch button to sports interface ② ,
and long press for 3S to enter sports mode . (There are two interfaces in the sport mode: the main interface of
sports mode③, pause interface/continue interface/ exit interface ④ ). Main interface of sports mode begins
to record the duration of exercise, steps, calories and heart rate. If there is no operation in 5S at this interface,
it will automatically return to the main interface and the screen is off after 1S. When touching the button or
wrist-up, the screen will be bright and the display remains in the main interface of sports mode. Switch to the
continue interface ④ with a single touch, press to “Designated function” and long press for 3S to enter, then
switch to “Exit” interface , long press for 3S to exit the sport mode , after that, sports data will be cleared.
2. Press to step counting interface ⑤ (gif) to display the current steps. The user can set the step goal
through the mobile phone. When the user reaches the set value of the sports goal, the display shows ⑥ (gif)
on bright screen and the bracelet vibrates , and the factory default value is 10000 steps.
3. Press touch button to the distance interface⑦ to display current Calories.
4. Press touch button to the distance interface⑧ to display current distance.
5. Press touch button to the heart rate interface ⑨ (gif) to start the measurement. The heart rate value will be
displayed around 20S and will continue to change. The screen will automatically turn off after no operation for
60S. (Long press the touch button to change the interface)