Assembly Instructions

6. Switch settings
click to enter - wear test, blood oxygen nighttime monitoring, HR automatic monitoring, stopwatch function
and disconnection reminder.
6.1 Wearing test
After connecting, the "Wear test" switch is turned on. When the bracelet is worn, the human body is
detected on wearing. If it is determined that it is not worn, all detection functions will be automatically turned
off, and no data to avoid error.
6.2 Heart rate automatic monitoring
After connecting, the "HR automatic monitoring" switch is turned on. The bracelet heart rate is reported to the
APP once every 30 minutes. When the switch is turned off, the sensor light at the bottom of the bracelet is not
lit, it is not measured, and there is no data on the APP and the background.
6.3 Stopwatch:
After connecting, the "Stopwatch function" switch is turned on, and the stopwatch interface⑧ appears on the
bracelet(the resident interface, the numbers on the stopwatch are all zero); Long press
to the stopwatch
interface
⑨ , short press to start the stopwatch, touch the button again to pause, and press 3S to exit in the
pause state. (Then the data of the stopwatch interface is zero). When the APP stopwatch function switch is
turned off, the stopwatch interface does not appear on the bracelet.
6.4 Blood Oxygen Nighttime Monitoring