User's Manual

M3P U-series AC EV Charging Station User Manual
20
e) Open the esptouch APP, enter the password for the WiFi network name (shown as Fig. 6-3), and
keep the phone in the esptouch APP, do not exit.
Fig. 6-3 APP interface
f) Press and hold the WiFi configuration button until the indicator light flashes at 5Hz frequency,
and the Charger enters the WiFi network configuration state. Click the "CONFIRM" button on the
phone.
g) Charger automatically configures WiFi network. When indicator light is always on, the Charger
has completed the WiFi network configure and has been connected to the WiFi router.