User's Manual

M3P U-series AC EV Charging Station User Manual

6.2.3. RFID reader

In general, M3P is equipped with RFID card reader as standard, and the charging process can be started

and stopped by using the RFID card (shown as Fig. 6-2) configured with the host. The special

customized card swiping function is not separately described here.

Fig. 6-2 RFID card

6.3. Configure WiFi network

a) Prepare a WiFi router operating at 2.4GHz and an Android or iPhone smart phone. Make sure the

Charger and smart phone are in the WiFi coverage area.

b) Turn on the WiFi router to ensure that the router can connect to the Internet normally.

c) Turn on the WiFi of the smart phone, connect the smart phone to the router through WiFi and ensure

that the phone can access the Internet through the router.

d) Install the "esptouch" APP on your smart phone.

Note:

 esptouch for iOS download link:

https://apps.apple.com/cn/app/espressif-

esptouch/id1071176700;

 esptouch for Android download link:

https://github.com/EspressifApp/EsptouchForAndroid/re

leases/download/v1.1.1/esptouch.apk

(for iOS) (for Android)

YELLOW Twinkle

Fault status. Get the fault code by the cycle

flashing of the fault indicator.

BLUE

OFF Unconnected to the network

ON Connected to the network

1Hz twinkle Normal connection with CMS

5Hz twinkle Configure WiFi network status