User's Manual

M3P U-series AC EV Charging Station User Manual
18
6. OPERATION
6.1. Power on
After the Charger is installed and confirmed to be correct, the MCB at the input side is switched on, and
indicator light is on, and the Charger enters the standby state.
6.2. Human-machine interface
6.2.1. HMI information
As shown in Fig. 6-1, the M3P U-series product is configured with multiple human-machine interfaces.
The functional parts of the Charger panel are described as follows:
Fig. 6-1 Schematic diagram of
EV Charger
①
4 LED lights:
Indicate 4 status, include power, charging, fault, and
network
②
Swipe card area:
Swipe the IC card to charging
③
WiFi configuration button:
Configure WiFi network name and password
6.2.2. LED indicators
The LED indicators on the panel are used to indicate the status of the Charger and the various combinations of
indicators are described as below.
No. Icon
Indicator
color
Indicator status Connotation
1
GREEN
ON Standby status
Twinkle Ground fault status
2
RED
ON connected to the EV
BLN control Charging status