User's Manual

M3P U-series AC EV Charging Station User Manual
15
b) Refer to 4.4.4 for more ambient conditions.
c) It is suggested that the Charger should be installed in a place with good ventilation, no direct
sunlight and shelter from wind and rain.
d) In order to ensure good ventilation condition, you should mount the Charger vertically and
leave enough space.
e) If you purchase products with floor mounted accessories, the installation effect is similar to that
of wall mounted product.
5.4. Installation Steps
5.4.1. Step 1: Install the attachment
a) Mounted the M3P accessories-D on the wall is shown in Fig. 5-2. As the figure, drill 4 holes of
10mm diameter and 50mm depth at the appropriate height, spaced 143mm×152mm apart, and
secure the accessories-D to the wall with expansion screws.
Fig. 5-2 M3P accessories-D mounted on the wall