Product Info

WF-R710-RTU1
IEEE 802.11 b/g/n 1T1R UART SoC Module
Sichuan AI-Link Technology Co.,Ltd. page 9 of 11
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01
1）List of applicable FCC rules
FCC Part 15 Subpart C 15.247 & 15.209
2）Specific operational use conditions
The module is a WIFI module. Operation Frequency: 2412-2462MHz
Number of Channel: 11
Modulation:
11b: DBPSK, DQPSK and CCK and DSSS
11g: BPSK, QPSK, 16QAM, 64QAM and OFDM
11n: BPSK, QPSK, 16QAM, 64QAM and OFDM
Type: FPC Antenna
Gain: 1 dBi Max.
The module can be used for mobile or portable applications with a maximum 1dBi antenna. The host manufacturer installing this
module into their product must ensure that the final composit product complies with the FCC requirements by a technical
assessment or evaluation to the FCC rules, including the transmitter operaition. The host manufacturer has to be aware not to
provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product
which integrates this module. The end user manual shall include all required regulatory information/warning as show in this
manual.
3）Limited module procedures
Not applicable. The module is a Single module and complies with the requirement of FCC Part 15.212.
4）Trace antenna designs
Not applicable. The module has its own antenna, and doesn’t need a host’s printed board microstrip trace antenna etc.
5）RF exposure considerations
The module must be installed in the host equipment such that at least 20cm is maintained between the antenna and users’ body;
and if RF exposure statement or module layout is changed, then the host product manufacturer required to take responsibility of
the module through a change in FCC ID or new application. The FCC ID of the module cannot be used on the final product. In
these circumstances, the host manufacturer will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
6）Antennas
Antenna Specification are as
follows: Type: FPC Antenna
Gain: 1 dBi