Specifications

Sichuan AI-Link Technology Co., Ltd.
page 8 of 9
C、IC Radiation Exposure Statement
Notice to OEM integrator
If the FCC ID is not visible when the module is installed inside another device, then the outside of the device
into which the module is installed must also display a label referring to the enclosed module.
The end product shall haves the words “Contains Transmitter Module FCC ID: 2AOKI-WFM68AUWF1”.
The device must be professionally installed.
The intended use is generally not for the general public. It is generally for industry/commercial use.
The connector is within the transmitter enclosure and can only be accessed by disassembly of the transmitter that
Installation must be controlled. Installation requires special training.
Any company of the host device which installs this modular with unlimited modular approval should perform the test of
radiated & conducted emission and spurious emission, etc. according to FCC part 15C: 15.247 and 15.407and 15.209
& 15.207, 15B Class B requirement, only if the tests result comply with FCC part 15C: 15.247 and 15.407 and 15.209 &
15.207, 15B Class B requirement, then the host can be sole legally
When the module is installed inside another device, the user manual of the hose contain below warning statement:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired operation.
is not normally required. The user has no access to the connector.