WF-M63B-USX2 WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WiFi Module Integrated Bluetooth 2.1+EDR/4.2/5.1 Features: Supported WLAN Standard IEEE Std. 802.11a IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n IEEE Std. 802.11ac Bluetooth 2.1+EDR/4.2/5.1 Chip Solution MediatekMT7663BUN Size 13.0mm x15.0mm x 2.3mm Module Standard Rate Band WF-M63B-USX2 WF-M63B-USX3 IEEE 802.11a/b/g/n/ac 866.7Mbps 2.4G/5G Bluetooth2.1+EDR/4.2/5.1 Sichuan AI-Link Technology Co.,Ltd.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 Feedback of customer’s Confirmation We accept the specification after Confirmed Customer name Customer signature Confirmation Date Please feed back this paper and first paper after your signature by the address,thanks! ADD:Anzhou,Industrial park,Mianyang,Sichuan Factory:Sichuan AI-Link Technology Co.,Ltd. Approved Fengyi Checked Designed Fanxiju Huang n hua Product Model Date Sichuan AI-Link Technology Co.,Ltd.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 Record of Modification Version Date of modification V0.1 2021/04/26 Main content of modification Firstrelease Sichuan AI-Link Technology Co.,Ltd.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 1. Introduction WF-M63B-USX3 module design is based on Mediatek MT7663BUN solution,The MT7663BUN is a highly integrated single chip which has built in a 2x2 dual-band wireless LAN radio and Bluetooth radio. It includes Bluetooth EDR and LE radio which complies with Bluetooth v2.1+EDR, v4.2, and v5.1. The Module is a highly integrated MAC/BBP and 2.4/5GHz PA/LNA single chip which supports a 866.7Mbps PHY rate.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 1.3 System Functions Table1: General Specification as below: Main Chipset Operating Frequency WiFi Standard Bluetooth Modulation Mediatek MT7663BUN 2.4G/5G 802.11a/b/g/n/ac(2x2) 2.1+EDR/4.2/5.1 WIFI:11b: DBPSK, DQPSK and CCK and DSSS 11a/g: BPSK, QPSK, 16QAM, 64QAM and OFDM 11n: BPSK, QPSK, 16QAM, 64QAM and OFDM 11ac: BPSK, QPSK, 16QAM, 64QAM,256QAM and OFDM Bluetooth:GFSK, π/4-DQPSK and 8-DPSK Data rates 11b:1, 2, 5.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 2. Mechanical Specification 2.1 Mechanical Outline Drawing Typical Dimension (W x L ): 13.0mmx15.00mm x 2.3mm General tolerance: ±0.2mm 2.2 Product Picture Topview Botview Sichuan AI-Link Technology Co.,Ltd.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 2.3 Pin define Pin 1 Define GND 2 ANT1 3、4、5、6、 GND 7、8 9 ANT2 GND 10、11 12 NC 13 GND 14 NC 15 NC 16 WIFI_WAKE 17 NC 18 PCM_SYNC 19 PCM_CLK 20 PCM_IN 21 PCM_OUT 22 NC 23 GND 24 RESET 25 GND 26 USB_TXN 27 USB_TXP 28 GND Sichuan AI-Link Technology Co.,Ltd.page 7 of 25 Pin 29 Define USB_RXN 30 31 USB_RXP GND 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 USB_DP USB_DM GND NC 3.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 3. Electrical Specification This Specification is based-on conductive DVT testing result. The extreme condition include overall temperature (0℃,+25℃,+40℃) and overall voltage (2.97V,3.3V,3.63V). 3.1 IEEE 802.11b Section: Items Contents Specification Mode Channel Data rate TX Characteristics 1. Power Levels(Calibrated) 1) 17dBm Target (For Each antenna port) @1Mbps~11Mbps 2.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 3. 2 IEEE 802.11g/a Section: Items Specification Mode Channel Data rate TX Characteristics 1. Power Levels 1) 17dBm Target (For Each antenna port) @ 11g 6Mbps~48Mbps 2) 15dBm Target (For Each antenna port) @ 11g 54Mbps 3) 17dBm Target (For Each antenna port) @ 11a 6Mbps~48Mbps 4) 15dBm Target (For Each antenna port) @ 11a 54Mbps 2. Spectrum Mask @ Target Power 1) at fc +/-11MHz 2) at fc +/-20MHz 3) at fc > +/-30MHz 3.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 3.3 IEEE 802.11nHT20 Section: Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels 1) 17dBm Target (For Each antenna port) @ 2.4G/MCS0~MCS6 2) 15dBm Target (For Each antenna port) @ 2.4G/MCS7 3) 17dBm Target (For Each antenna port) @ 5G/MCS0~MCS6 4) 15dBm Target (For Each antenna port) @ 5G/MCS7 2. Spectrum Mask@ Target Power 1) at fc +/-11MHz 2) at fc +/-20MHz 3) at fc > +/-30MHz 3.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 3.4 IEEE 802.11nHT40 Section: Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) 17dBm Target (For Each antenna port) @ 2.4G/MCS0~MCS6 2) 15dBm Target (For Each antenna port) @ 2.4G/MCS7 3) 17dBm Target (For Each antenna port) @ 5G/MCS0~MCS6 4) 15dBm Target (For Each antenna port) @ 5G/MCS7 2. Spectrum Mask@Target Power 1) at fc +/-21MHz 2) at fc +/-40MHz 3) at fc > +/-60MHz 3.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 3.5 IEEE 802.11ac Section: Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) 17dBm Target (For Each antenna port) @VHT20/VHT40/VHT80 MCS0~MCS6 2) 15dBm Target (For Each antenna port) @VHT20/VHT40/VHT80 MCS7 3) 14dBm Target (For Each antenna port) @VHT20/VHT40/VHT80 MCS8~MCS9 2.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 3.6 BluetoothSection: 3.6.1 BR Specification Items Host Interface Channel Modulation TX Characteristics 1.Output Average Power 2.Modulation Characteristics 1)Delta f1(Avg) 2)Delta f2max(For at least 99.9% of all Delta f2max) 3)Delta f2/ Delta f1 3.Initial Carrier Frequency Tolerance 4.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 3.6.2 EDR Specification Items Host Interface Channel Modulation TX Characteristics 1.Relative Transmit Power 1) π/4-DQPSK 2) 8PSK 2. Frequency Stability 1) Omega-i 2) Omega-0 3) Omega-0 + Omega-i 3. Modulation Accuracy 1) RMS DEVM π/4-DQPSK 8PSK 2) Peak DEVM π/4-DQPSK 8PSK 3) 99% DEVM π/4-DQPSK 8PSK RX Characteristics 1. ReceiverSensitivity (BER<0.01%) 1) π/4-DQPSK 2) 8PSK 2. Maximum usable signal (BER<0.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 3.6.3 LE Specification Items Host Interface Channel TX Characteristics 1. Output power at NOC 2. ModulationCharacteristics 1)Delta f1(Avg) 2)Delta f2max(For at least 99.9% of all Delta f2max) 3)Delta f2/ Delta f1 3. Carrier frequency offsetand drift 1) Frequency Offset 2) Frequency Drift 3) Max Drift Rate 4.In-band Spurious Emissions 1)+/-2M offset 2)>+/-3MHz offset RX Characteristics 1. ReceiverSensitivity (BER<30.8%) 2.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 4. Reference Design 4.1 SCH 4.2Recommend PCB Layout Decal 5. Host Interface Timing Diagram 5.1Chip power on sequence 5.1reset sequence 6. Software Requirements Sichuan AI-Link Technology Co.,Ltd.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 The driver supports the following operating systems: Linux, Microsoft Windows XP, Vistaand Win7. Mfg. software tool is MT7663BUN_QA_Tool. 7. DC Characteristics Symbol Parameter DVDDIO VIL VIH VOL VOH Min Type Max Unit 3.3V IOVoltage Input Low Voltage 2.97 -0.3 3.3V 3.63 VDD33*0.25 V V Input High Voltage VDD33*0.625 VDD33+0.3 V Output Low Voltage -0.3 0.4 V Output High Voltage VDD33-0.4 VDD33+0.3 V - 8.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 8.Packaging Information: 1. Product placement direction, label sticking position and packaging shall be carried out according to the schematic diagram; 2. Put 1000 pieces of products in each roll, 1 roll in each small box, 8 small boxes in total in the big box, 8000 pieces in total in quantity/box; 3, outer box size: 370mm*300mm*370mm, small box size: 360mm*360mm*37mm; 4.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 9. Product Label&Label Location: Sichuan AI-Link Technology Co.,Ltd.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 CE Radiation Exposure Statement Herby, Sichuan AI-Link Technology Co., Ltd. Declares that this RF 2.4G&5G Wireless and BT Module , WF-M63B-USX2, WF-M63B-USX3 are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Operation Temperature:Use the WF-M63B-USX2, WF-M63B-USX3 in the environment with the temperature between -10℃ and 70℃ Operation Frequency range:2.400 ~ 2.4835 GHz,5.150~5.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 • The minimum safe distance for people from the WF-M63B-USX2, WF-M63B-USX3 been determined by conservative calculation to be less than 20 cm for the allowable antenna types.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 IC warning: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 Requirement per KDB996369 D03 1.1 List of applicable FCC rules List the FCC rules that are applicable to the modular transmitter. These are the rules that specifically establish the bands of operation, the power, spurious emissions, and operating fundamental frequencies. DO NOT list compliance to unintentional-radiator rules (Part 15 Subpart B) since that is not a condition of a module grant that is extended to a host manufacturer.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 1.4 RF exposure considerations It is essential for module grantees to clearly and explicitly state the RF exposure conditions that permit a host product manufacturer to use the module.
WF-M63B-USX3 IEEE 802.11a/b/g/n/ac2T2R USB WIFI Module&BT2.1+EDR/4.2/5.1 1.8 Additional testing, Part 15 Subpart B disclaimer The grantee should include a statement that the modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.