User Manual

Table Of Contents

Recommended

installing the camera

about 2.6M

1*Position paper

1* USB charging cable

1.3 Quick Setup

1.3.1 Insert the USB cable of solar panel to the “USB” Silicon Flap

on the bracket base for batterty charging.

1.3.2 Press the Power switch to turn ON/OFF the camera,

1.3.3 Wait the voice prompt step by step for pairing the camera with the APP.

1.4 Note:

1.4.1 Before you turn on the camera, please close the silicon flap to avoid rain

leakage.

1.4.2.Make sure your phone is connecting to the 2.4Ghz wifi firstly before you

pairing the camera.

Silicon flap

Power

ON/OFF

Bracket

PAGE 1
*Position paper 1* USB charging cable Bracket Silicon flap Power ON/OFF 1.3 Quick Setup 1.3.1 Insert the USB cable of solar panel to the “USB” Silicon Flap on the bracket base for batterty charging. 1.3.2 Press the Power switch to turn ON/OFF the camera, 1.3.3 Wait the voice prompt step by step for pairing the camera with the APP. 1.4 Note: 1.4.1 Before you turn on the camera, please close the silicon flap to avoid rain leakage. 1.4.2.Make sure your phone is connecting to the 2.
PAGE 2
Connect the device with power supply, and make sure your mobile phone isconnected to an available Wi-Fi. Then press 'Setup device' 4.6 After the power on the device, wait for the blue LED and voice prompt The device is waiting for pairing,Which means your device is in pairing mode.