User Manual

PUMP INSTALLATION: USE AND REGULATION
Proceed as follow to install the pump:
Insert the suction cups in the holes under the pump body (5+1); clean the basin, fountain or
aquarium wall and pressing the pump on the suction cups to x it. Turn the water ow regulator
on the front side of the pump to change the ow (3). SYNCRA is provided with 2 threaded
adaptor (7) to which can be attached either exible or rigid tubes suitable to adapt the pump
for many uses. In case of “dry” use (out of water), take away the intake grill (9). Position the
ow regulator according to the graining and detach it (3) pushing it softly out of its place.
Screw the 2 adaptors in the inlet and outlet holes and connect the tubes. Insert the plug
in the socket.
MAINTENANCE
For the periodic maintenance of the pump, rst of all unplug the plug from the electric socket
and then take the pump.
Proceed in the following way: take away the pre-lter (8), the ring nut (9) and then the
threaded pre-chamber (4); take away the rotor (2) and rinse it under fresh water. Always
check the condition of the o-rings.
Any damage to the o-rings, even small, can seriously endanger the pump performances. In
this case it is recommended to substitute them.
Rinse each part with water, using a soft brush to remove the deposit. Then assemble
everything in the inverse order.
ONLINE HELP
Watch our tutorial videos on THE SICCE YOU TUBE ofcial channel www.
youtube.com/SICCEspa.
INSTRUCTIONS FOR THE CORRECT DISCHARGE OF THE PRODUCT
ACCORDING TO EU DIRECTIVE 2002/96/EC
When used or broken, the product does not have to be discharged with the
other waste. It can be delivered to the specic electric waste collection centers
or to dealers who give this service. Discharge separately an electric tool avoid
negative consequences for the environment and for the Health and allows to regenerate the
materials so to have a great saving of energy and resources.
WARRANTY
This product is guaranteed against defects of materials and workmanship for a period of
3 years from the date of purchase, except the rotor 2. The warranty certicate must be
lled in by the dealer and must accompany the pump if it is returned for repair, along with
the cash register receipt or similar document. The warranty covers the replacement of the
defective parts. In case of improper use, tampering or negligence by the buyer or user, the
guarantee is void and expires immediately. The guarantee is also void in absence of the
cash register receipt or similar document. The shipping cost to and from the factory, or the
repair station, have to be paid by the buyer.
FIND OUT HOW TO GET YOUR PRODUCT GUARANTEED FOR 5 YEARS
To improve our service and our clients’ satisfaction, SICCE offers the possibility of adding a 2
years extension to the warranty by simply registering your product on our website www.sicce.
com in “Sicce for you/Product registration”. Fill-in the form and upload the product’s purchase
receipt. After having correctly inserted all your data, complete the warranty extension request.
ATTENTION!
The limestone deposits and the natural wear-out of the components might cause a raise
of the pump’s noise. However, they do not affect the good functioning of the pump. In this
case, we recommend you to replace the impeller.