User manual

8
To add a card user (Method 2)
This is the alternative way to enter cards
using User ID Allocation. In this method a
User ID is allocated to a card. Only one
userIDcanbeallocatedtoasinglecard.
User can be added continuously without exiting
programming mode
To add a card user (Method 3)
Card num ber is the last 8 digits printed
on the back of the card,
user ID number
auto generation
User can be added continuously without exiting
programming mode
To add a card user (Method 4)
In this method a User ID is allocated to a
card number. Only one user ID can be
allocated to the card number
User can be added continuously without exiting
programming mode
To delete a card user by card. N ote users
can be deleted continuously without
exiting programming mode
To delete a card user by user ID. This
option can be used when a user has lost
their card
To delete a card user by card number.
This option can be used when the user
want to make the change but the card
has lost
Note users can be deleted continuously without
exiting programming mode
To add a card and PIN user in card and PIN mode ( )
To A dd a card and Pin user
(The PIN is any four digits between 0000
& 9999 with the exception of 1234 which
is reserved.)
Add the card as for a card user
Press to exit from t he programming mode
Then allocate the card a PIN as follows:
To change a PIN in card and PIN mode
(Method 1) Note that this is done outside
programming mode so the user can
undertake this themselves
To change a PIN in card and PIN mode
(Method 2) Note that this is done outside