User manual

1. Packing List

Name Quantity Remarks

Keypad 1

User manual 1

Screw driver 1

Φ20mm×60mm,Special for keypad

Rubber plug 2

Φ6mm×30 mm

, used for fixing

Self tapping screws 2

Φ4mm×28 mm

, used for fixing

Star screws

Φ3mm×6mm,

used for fixing

Please ensure that all the above contents are correct. If any are missing please notify the

supplier of the unit.

2. Quick Reference Programming Guide

To enter the programming mode

999999 is the default factory master code

To exit from the programming mode

Note that to undertake the following programming the master user must be logged in

To change the master code

Themastercodecanbe6to8digits

To add a PIN user.

The ID number is any number between 1 & 2000. The

PIN is any four digits between 0000 & 9999 with the

exception of 1234 which is reserved. Users can be added

continuously without exiting programming mode

To add a card user

Cards can be added continuously without exiting

programming mode

To delete a PIN or a card user. for a PIN user or

for a card user

Users can be deleted continuously without exiting