User's Manual
ALFOplus 24GHz (North America) - Release 01.05.0x - MN.00395.E - 004 95
Step 3
Insert terminated RJ-45 plug into connector housing.
While holding the connector body, pull cable through connector housing until RJ plus is near to the housing.
Align the plug latch with the connector housing keyway.
Depress Plug latch and completely insert the RJ plug into the housing.
Fig.59 - Connector housing
Step 4
Attach and tighten sealing boot using a 19mm wrench.
Recommended tightening torque is 5.5 to 6.0 (in-lbs) or 0.62 to 0.68 (N-m)
Fig.60 - Connector tight