User's Manual

ALFOplus 24GHz (North America) - Release 01.05.0x - MN.00395.E - 004 85
Fig.45 - Standard RJ45 crimper (without comb) used for RJ45 shielded outdoor connector
8.10 USER CONNECTORS
ALFOplus provides an auxiliary connector (M12) and 2 Amphenol connector, which guarantee Ethernet port
compatibility for both version: Gigabit electrical and optical.
Warning: to ensure waterproofing, don’t forget to close the port after use, with relevant cap.
8.10.1 Auxiliary connector
The auxiliary 5 pin circulator connector has various functions and it is used when:
• the Power over Ethernet injector through the data Lan cable is not available or as additional power
supply source
• during the alignment of antenna (remember to enable received signal strength indicator in Equip-
ment menu - General preset RSSI
It is recommended after the alignment to set RSSI as Disable not to overload CPU
• In case of emergency, if ALFOplus IP address is unknown, connect it with serial console (F03594),
as shown in Fig.50
using hyperterminal 115200 8, N, 1 and press any button to access in the login.
The available auxiliary cables already assembled:
• F03594 cable for laboratory use only (see Fig.50
)
• F03608 2xM12 5P pointing cable (remove it after commissioning pointing) (see Fig.51
).