Software Manual

ALFOplus 24GHz (North America) - Release 01.05.0x - MN.00395.E - 004 117
Fig.84 - Frequency and power setting
Port configuration setting
See Fig.85.
Into WebLCT at position:
• Equipment menu
• Main - Port configuration
•In Ethernet card you can modify the IP address, netmask and supervisioning parameters. Press
Apply and Confirm. Press Store and Confirm.
Warning: the supervisioning configuration is applied immediately, instead IP address and Subnetmask re-
quires apply store and restart.
Warning: for remote radio management change port settings in “Out of Band” or “Drop Node” or “In Band”
on both sites.